UltraBio™支原体去除喷雾剂

未知

UltraBio™ Mycoplasma Elimination Spray

M743357-500ml

500ml

室温

常规运输

室温密封保存，18个月有效。

污染细胞的支原体来源广泛，如培养环境、被污染的细胞、人体表面的携带、实验试剂和实验器材等，其中环境污染是最常见的原因。在多人共用一台培养箱、同一操作台等设备和处于同一实验环境时，即使非常注意，细胞也容易被支原体污染，因此定期对工作区域进行支原体的消杀非常重要。阿拉丁推出的清除支原体喷剂是一款能快速、高效、无毒地去除和预防工作区域中支原体污染的即用型喷雾。本产品适用于实验台、生物安全柜、超净工作台、二氧化碳培养箱、移液器、液氮罐、门把手等实验室设备及实验室环境的支原体污染的去除和预防，同时也适用于广谱的抗菌消毒。 应用 用于实验环境如操作台、培养箱、器械设备等场景的支原体预防和清除。 产品优势 1.快速高效：本产品主要成分是一种多肽类表面活性剂，通过改变支原体膜的通透性从而杀死支原体，因此支原体产生耐药的可能性极低，喷洒后仅需约5-10分钟即可根除支原体。 2.细胞毒性小：本产品不能穿过真核细胞的细胞膜，因此不会改变细胞的任何特性，支原体被清除后，细胞后续的生长增殖几乎无影响。 3.操作便捷：传统的预防和消除细胞培养环境中支原体的方法有甲醛高锰酸钾熏蒸消毒和酒精擦拭法，这两种方法操作较为繁琐，作用时间长，而且可能会对人体和细胞产生一定的毒副作用；本产品为即用型消毒液，直接喷洒于工作区域即可起到快速去除支原体污染的作用。 使用说明 1.将清除支原体喷剂喷剂均匀地喷于待清洁或消毒的实验设备表面或实验环境； 2.等待 5-10 分钟； 3.用洁净的干纸巾将已喷过本产品的超净工作台等实验设备和器材表面擦拭干净； 4.通风 2-3 分钟后即可使用。 注意事项 1.操作时，穿戴适当的防护服和手套。 2.本产品若与皮肤、眼睛接触，应立即用大量的清水冲洗，不要延误，必要时应及时就医。 Mycoplasma contaminating cells has a wide range of sources, such as culture environment, contaminated cells, human surface carrying, experimental reagents and experimental equipment, among which environmental pollution is the most common cause. When many people share an incubator, the same console and other equipment and are in the same experimental environment, even if they are very careful, the cells are easily contaminated by mycoplasma, so it is very important to kill mycoplasma regularly in the working area. Aladdin 's mycoplasma removal spray is a ready-to-use spray that can quickly, efficiently, and non-toxically remove and prevent mycoplasma contamination in the work area. This product is suitable for the removal and prevention of mycoplasma contamination in laboratory equipment and laboratory environment, such as test bench, biological safety cabinet, ultra-clean bench, carbon dioxide incubator, pipette, liquid nitrogen tank, door handle and so on. It is also suitable for broad-spectrum antibacterial disinfection. Product advantage 1.Rapid and efficient : The main component of this product is a polypeptide surfactant, which kills mycoplasma by changing the permeability of the mycoplasma membrane, so the possibility of mycoplasma resistance is extremely low, and it takes only about 5-10 minutes to eradicate mycoplasma after spraying. 2.Low cytotoxicity : This product cannot pass through the cell membrane of eukaryotic cells, so it will not change any characteristics of the cells. 3.Convenient operation : The traditional methods of preventing and eliminating mycoplasma in cell culture environment include formaldehyde potassium permanganate fumigation disinfection and alcohol wiping method, which are complicated to operate, have a long action time, and may have certain toxic and side effects on human body and cells. This product is a ready-to-use disinfectant, which can be directly sprayed on the working area to quickly remove mycoplasma contamination. Direction for use 1.Spray the spray evenly on the surface of the experimental equipment to be cleaned or disinfected or the experimental environment ; 2.wait for 5-10 minutes ; 3.Wipe the surface of the experimental equipment and equipment that have been sprayed on the product with a clean dry paper towel ; 4.Ventilation can be used after 2-3 minutes. Matters needing attention 1.Wear appropriate protective clothing and gloves when operating. 2.If the product is in contact with the skin and eyes, it should be immediately rinsed with a large amount of water, do not delay, if necessary, should be timely medical treatment.