pNPP ONE

对硝基苯酚

pNPP ONE

P494181-100ml

100ml

Ready-to-use (RTU)

2-8°C储存,避光

冰袋运输

pNPP (p-nitrophenylphosphate) is a chromogenic substrate for Alkaline Phosphatase (AP). In the presence of AP, pNPP is hydrolyzed rapidly to pnitrophenol and inorganic phosphate. Liberated pnitrophenol is seen as a clear yellow color that is measured at 405/620 nm. pNPP ONE liquid ready-to-use substrate is active and stable. PNPP ONE shows superior background characteristics due to its high temperature robustness compared to pNPP (cat. no. P494193 ). Product Characteristics pNPP (p-nitrophenylphosphate) is a chromogenic substrate for Alkaline Phosphatase (AP). In the presence of AP, pNPP is hydrolyzed rapidly to p-nitrophenol and inorganic phosphate. Liberated p-nitrophenol is seen as a clear yellow color that is measured at 405/620 nm. pNPP ONE liquid, ready-to-use substrate is an active and stable substrate formulation. pNPP ONE shows superior background characteristics due to its high temperature robustness, compared to pNPP (cat. no. P494193 ) making it suitable for use in hot climate countries. Composition & Properties pNPP ONE is a liquid, ready-to-use and aqueous formulation. The buffer solution contains stabilized pNPP and appropriate stabilizing components. Recommended stop solution is an equal volume of 0.1 M sodium hydroxide solution. Working Procedure 1.The desired amount of substrate is poured into a sealed container and allowed to reach room temperature in the dark. 2.Recommended volumes are 100 µl substrate solution per microtiter well. Development time is typically 15- 30 minutes. Optimal time is determined by the user and will vary according to the procedure and the incubation temperature. 3.100 µl of 0.1 M NaOH is then added and mixed thoroughly. 4.In kinetic assays, the color is read directly at 405 nm. For endpoint assays the absorbance is read at 405/620 nm. Tips & Tricks • If a more sensitive substrate giving lower detection limits is needed, we recommend pNPP (cat no. P494193 ). This substrate offers a 10% higher sensitivity than pNPP ONE. • A stop solution of 0.1 M NaOH requires no hazardous labelling. In case a higher assay sensitivity is required, a 1.0 M NaOH may be used as stop solution offering an approx. increase of OD of 3%. In both cases a 1 hour stop stability is guaranteed. Handling & Storage • Store solution at 2-8 °C in the dark. • Avoid exposure to light and heat. • Re-dispense only into bottles made of High Density Polyethylene (HDPE), amber color. Dispensing guidelines are available upon request.